Printed Part FEA

Model

Drop a file or browse STL, STEP, STP

Orientation on the build plate

Study settings

Number of modes Lowest frequency (Hz) Highest frequency (Hz)

Number of buckling modes

Sweep from (Hz) Sweep to (Hz) Points per interval Damping ratio (%) Modes in superposition

Load increments Large deflection (geometric nonlinearity) Plasticity (uses yield strength and tangent modulus)

Reference (stress-free) temperature (°C)

Shell Solid

Shell thickness

Thickness from

Shell thickness (mm)

Walls Line width Layer height Top layers Bottom layers

Mesh surface is the Preview thickness on the model

Face overrides

Preset

Elastic

Young's modulus E (MPa) Poisson's ratio ν Density (kg/m³)

Strength

Tensile, in-layer (MPa) Interlayer (MPa) Yield (MPa) Tangent modulus (MPa)

Thermal

Conductivity (W/m·K) Expansion (µm/m·K)

Global element size (mm) Element order

Refine on curved surfaces

Local refinement

Saved HQ solves

Idle

Upload an STL or STEP file to begin

Display

Deformed shape Deformation scale off

Clip colors at 98th pct Mark peak Mesh edges Load symbols

Section cut

Axis Reverse

Export

Solve setup

Run or recall a solve to see the inputs used.